How to determine the specifications of channel steel

Release time:

2022-09-16

The delivery length of channel steel can be divided into two types: fixed length and double length, and the tolerance value shall be specified in the corresponding standards. The length selection range of domestic channel steel is divided into three types based on different specifications: 5-12m, 5-19m, and 6-19m. The length selection range of imported channel steel is generally 6-15m.

The specifications of channel steel mainly use dimensions such as height (h), leg width (b), waist thickness (d), etc
At the same height, lightweight channel steel has narrower legs, thinner waist, and lighter weight than regular channel steel. 18-40 are large channel steels, while 5-16 are medium channel steels. Imported channel steel shall be marked with actual specifications, dimensions, and relevant standards. The import and export ordering of channel steel is generally based on the specifications required during use after determining the corresponding carbon bonded steel (or low alloy steel) steel grade. Except for the specification number, channel steel does not have a specific composition or performance series.
The delivery length of channel steel can be divided into two types: fixed length and double length, and the tolerance value shall be specified in the corresponding standards. The length selection range of domestic channel steel is divided into three types based on different specifications: 5-12m, 5-19m, and 6-19m. The length selection range of imported channel steel is generally 6-15m.

Latest News

What is the material of carbon steel plate and what are its advantages and disadvantages

It is a type of steel with a carbon content lower than 2.11% and without intentionally adding metallic elements, and can also be called plain carbon steel or carbon steel. In addition to carbon, it also contains a small amount of elements such as silicon, manganese, sulfur, and phosphorus inside. The higher the carbon content, the better the hardness and strength, but the lower the plasticity.

2022-09-16

What is the difference between carbon steel and stainless steel

The density of carbon steel is slightly higher than that of ferritic and martensitic stainless steel, but it is lower for austenitic stainless steel, so the difference between carbon steel and stainless steel is different.

2022-09-16

Four processes of steel bar processing

The processing of steel bars generally involves four processes: rust removal of steel bars; Straightening of steel bars; Steel bar cutting; Forming of steel bars. When the steel bar joint is connected with straight or conical threads, it is also necessary to add the steel bar end upsetting and thread processing procedures. Rebar batching and replacement Rebar replacement

2022-09-16

Discount SPCC Carbon Steel Plate

Steel is an essential material commonly used in various industries due to its durability, strength, and versatility. One of the most commonly used types of steel is carbon steel, which is known for its cost-effectiveness and excellent mechanical properties. Among the several types of carbon steel, Discount SPCC Carbon steel plate has gained popularity among industries because of its excellent properties and cost-effectiveness.

2023-04-18

Characteristics of copper pipes

Lightweight, with good thermal conductivity and high low-temperature strength. Commonly used in the manufacturing of heat exchange equipment (such as condensers). It is also used for assembling low-temperature pipelines in oxygen production equipment. Copper pipes with small diameters are commonly used for conveying pressurized liquids (such as lubrication systems, oil pressure systems, etc.) and as pressure measuring pipes for instruments.

2023-03-24

Advantages of I-beams

I-shaped beams are hollow web members. For high-strength materials, hollow web members are better than solid web members in terms of weight, material, and labor saving. This cross-sectional design mainly uses the flange farthest from the centroid to resist bending moments (because the farther the flange is, the greater the moment of inertia), and mainly uses the web to resist shear. As for the inconvenience in making it, it can be solved by factory or molding. Saving materials, labor, and time is efficiency.

2023-03-14